Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a simple and effective method to safeguard your vehicle from theft. It connects directly to your vehicle's CAN network and is virtually unnoticeable.
Find a reliable source of power and a point of grounding. These wires must be properly protected from electrical shorts.
Preventing theft
The Ghost 2 Immobiliser creates an individual PIN code by using the electronic buttons on your steering or the center console. This makes sure that only you are capable of starting your vehicle. Even if thieves manage to copy your keys or hack the system of your car it will not be able start the vehicle. It's also silent and inaccessible to anyone who attempts to test it and you can be sure that no one will notice that you've added a new layer to security.
Another reason it is so effective at protecting against theft is the ability to stop your engine even if a thief has managed to gain entry. This is accomplished by using an additional device, known as the Shadow. It is connected to your vehicle's CAN network and does not communicate via radio frequency. This makes it difficult for thieves and others to find. The Shadow can also be linked to the vehicle's tracking/paging system permitting you to track its movements. It has an output that can be used to sound a siren when someone tries to take it.
When working with wiring it is important to work in a space that is well-lit. This will allow you identify the right wires and avoid accidental short circuits or disconnections. Making sure you double-check and test the connections is crucial and also protecting the wiring from the elements. Cable tie can be used to secure wires and bundle them. This will improve their appearance and decrease the possibility of them being disconnected when the vehicle is operating.
It is also a great idea to mark the CAN L and H wires using labels or tape. A misidentification of their location could cause a power surge that damages the immobiliser. Multimeters can be used to check that the grounding and power source are supplying the same 12V level and a solid connection.
Easy to use
A ghost immobiliser is a great way to keep your vehicle safe from theft. It can be linked with an iPhone application for simple management and monitoring. The app can also send alerts if your car is altered. It can also assist you locate your car in the event of theft.
The Ghost immobiliser is discreet and doesn't require any special equipment in order to function. It is linked to the CAN system of your vehicle and programmed with a unique PIN code. Ghost 2 immobiliser can activate it with the series of buttons on your dashboard, steering wheel or the WeCar application. The unique code must be entered before the engine will start, so thieves cannot just turn on your car and drive away.
Installing an immobiliser from Ghost is a straightforward process. However, it's crucial to follow the directions to ensure that the systems of your vehicle are integrated smoothly. The first step is to disconnect the battery. This will prevent accidental airbag deployment and ensure safety. It is also essential to work in an area which is well-lit in order to avoid making mistakes and to make precise connections. To ensure a secure and reliable connection, it's important to use high-quality connectors or a proper soldering.
The CAN H and L wires are required to connect the Ghost immobiliser to the vehicle's wiring. With a wiring diagram for your vehicle to identify these wires, find a suitable place to connect them. Mark these wires with tape or labels to aid in identifying them when installing.
Once the connections are established, it's a good idea to test the immobiliser to make sure that it is working properly. It's also a good idea to test the Transport Mode, which disables the Ghost system and allows you to temporarily disable your security features. This is particularly useful for situations like vehicle transportation or servicing. This feature is especially useful in the event that your vehicle is old and requires the battery to be isolated during maintenance.
Low-profile
A ghost immobiliser can be used to stop theft from keyless entry vehicles. It works by capturing the vehicle's remote control signal and constructing a barrier that thieves are unable to break it without the correct PIN code. It's a safe and discrete method of protecting your vehicle, and insurance companies even recommend it to reduce the cost of your monthly costs. It's a low-profile, hidden system that is located within the buttons of your car. It doesn't have LED indicators, making it almost unnoticeable by thieves.
In contrast to other security systems, the Ghost immobiliser is linked to your vehicle's CAN data network instead of a key fob. It is secure and thieves are unable to disable it by cutting wires. This makes it more difficult to steal your vehicle, and it's an excellent choice for older vehicles that are not fitted with a modern keyless entry system.
Installing a ghost immobiliser is easy if you have the right tools and materials. You'll need a few basic hand tools and a multimeter to test electrical values, and insulation tape or cable ties to ensure that your connections are secure and well-insulated. It is also important to disconnect your battery before starting, and make sure that the wires are neatly bundled and insulated to prevent theft from thieves.
If you're not confident in doing your own immobiliser installation it is possible to find an auto repair shop in your area to do it for you. They will take care of the entire process, from the initial inspection through to the installation. If something is not working, they'll offer a warranty. They'll answer any questions regarding the immobiliser, and help you decide if it's a right choice for you vehicle.
The Autowatch Ghost 2 is a smart immobiliser that is integrated directly with the ECU of your car. This protects against key cloning and hacking attacks that are typical in modern vehicles. It's TASSA certified and provides superior security against theft, so you can rest at ease knowing that your car is secure while driving it.
TASSA verified
The Ghost immobiliser is among the best ways to protect your car from theft. It connects to the CAN data network of your vehicle and blocks the engine from starting without your unique PIN code. Ghost 2 immobiliser isn't able to be detected by thieves and is a great alternative to car alarms. You can change your PIN code at anytime and only you know it. This will ensure the security of your vehicle.
A TASSA certified installer will finish the installation of Ghost Ghost system in a couple of hours at your home or place of work. They will also give you owner's guides, installation certificates and a complimentary emergency card. They will also provide you with a a thorough demonstration of the device, and ensure that you are happy with their service before they leave.
The Ghost, unlike other immobilisers is able connect directly to the CAN data network of your vehicle. This allows it to be installed without severing any wires. It is also silent, which makes it difficult to be detected by thieves. The system is equipped with a unique and reversible PIN code, which you enter by pressing buttons on the dashboard or steering wheel. This stops anyone from starting your vehicle, even if they have your key fobs.
Disconnect the battery before you begin installing the ghost 2 immobiliser. This will prevent accidental deployment of airbags or short circuits. After the battery is disconnected you must follow the instructions in the user's manual to connect the immobiliser. It is also recommended to consult online resources for further guidance specific to your car's model.
After completion, you must check the immobiliser to ensure that it works properly. You can accomplish this by entering the PIN code and then trying to start the vehicle. Then, you should conduct regular checks on the immobiliser in order to ensure it is working properly. This will help you spot any problems early so that you can resolve them quickly.